Products

Instruments


Introduction

Depending on the size and the diagnostic panel of the lab, the requirement of the equipment may vary.

Fully automated coagulation analysers

The Ceveron® 100-Series comprises coagulation analysers that can detect the parameters of classical coagulation diagnostics as well as thrombin generation.

By using a quenching module, factor XIII activity and the ADAMTS-13 activity can be determined fully automatically with the Ceveron® s100. 

 

The Ceveron® 100-Series includes

Ceveron® c100:          classic haemostasis assays, chromogenic and turbidimetric assays

Ceveron® t100:           classic haemostasis assays, chromogenic and turbidimetric assays and additional thrombin generation (TGA)

Ceveron® s100:          classic haemostasis assays, chromogenic and turbidimetric assays and additional TGA, Factor XIII activity, and ADAMTS-13 activity.

 
Specifications of the fully automated Ceveron®-Series

Methods

Clotting, chromogenic, turbidimetric assays, TGA module* and quenching module*

Optic

4 channels with 4 wave lengths each: 405, 540, 630, 740 nm

4 channels TGA module*

4 channels quenching module*

Samples on board

36 (24 Primary tubes +12 sample cups)

Reagents on board

32, allocated on

14 (12-18 °C),

10 (RT)

8 buffer and dilutions

Cuvettes on board

84

Tests per sample

36

Sample volume

5-400 µL

Reagent volume

5-400 µL

Throughput

75 PT/h

Emergency samples

Yes, up to 8 samples

Quality control

Integrated, user defined QC limits, Westguard rules

Patient memory

unlimited

Operating system

Windows® 10

Seize (device)

750 mm x 675 mm x 420 mm (D x W x H)

Weight

40 kg

 
High precision, flexibility and throughput

Rerun and reflex testing in combination with very low cv in routine and speciality testing, guarantee secure results for perfect diagnostics.

Having a minimal patient and reagent dead volume, adult´s and children´s samples can be run without any differentiation.

Due to the workflow of Ceveron® 100 series an exact incubation time on each measurement is guaranteed.

Easy access to all raw data, help comparing patient results, QC results and calibration curves.

  • Westguard Rules
  • Laboratory specific confidence range
  • 3s range
  • Lifetime of validation adjustable

With a throughput of 75 PT/hour, a TGA result below 20 minutes and an ADAMTS13 activity result within 25 minutes, Ceveron® 100 series instruments are the perfect solution for fast and precise diagnostic of patients.

Ceveron® 100 series is ready to use within 5 minutes after switching on the instrument.

No daily maintenance needed. Just 15 minutes once per week.

Handling of samples and reagents is completly traceable. This is indepedent from entering the samples via barcode or manually.

The reagent lots can be send to the LIS.

All temperatures during pipetting, incubation and measurement are displayed and stored internally.

Semi-automated coagulation analysers

The Ceveron® one, four and ten instruments comprises semi-automated coagulation analysers that use a rotating ball to detect the end point of coagulation. Ceveron® four and ten are available with an additional optical unit.  

The Ceveron® m instruments with a unique detection principle and in combination with high-level analytical algorithm, measures exact, precise and reproducible results. Operation via intuitive, colored touchscreen, as well as patient result management are perfectly optimized.

The Ceveron® m1 has one channel, the Ceveron® m2 has 2 channels and the Ceveron® m1 has 4 channels

Ceveron® one, four and ten
Specifications of the  Ceveron® one, four, ten series

Ceveron® one, four and ten are semi-automated coagulation analysers to detect coagulation and fibrinolysis.

Mechanical clot detection: a magnetic sensor monitors the rotation of a steel ball in the cuvette. Clot formation stops the rotation of the ball and this is recorded by the sensor as the test end point.

 

Specifications

Ceveron®  one

Ceveron® four

Ceveron® ten

Mechanical channels

1

4

10

Optical channel (405/650 nm)

--

1 (optional)

1 (optional)

Incubation positions (37°C)

2

4

10

Sample preparation positions (RT)

--

8

20

Reagent positions (37° C)

2

5

10

Cuvette volume

250 – 600 µL

250 – 600 µL

250 – 600 µL

Temperature controlled (37° C)

--

2

2

Pre-defined tests

PT, INR

PT, aPTT, TZ, FIB, Factors

PT, aPTT, TZ, FIB, Factors

Free definable tests

--

AT, anti-Xa, D-Dimer, chromogenic assays…

AT, anti-Xa, D-Dimer, chromogenic assays…

Result output

%, INR, ratio, Sec

%, INR, ratio, Sec., min, h, g/L, mOD, free definable

%, INR, ratio, Sec., min, h, g/L, mOD,   free definable

Calibration curve

up to 4 points

up to 5 points

up to 5 points

Clotting tests - Capillary Blood/Venous Blood

yes

yes

yes

Clotting tests – Plasma

yes

yes

yes

Chromogenic tests

--

yes (optional)

yes (optional)

Barcode reader interface

--

yes

yes

 Patient results memory

100

1000

1000

External printer

yes

yes

yes

Dimensions (D x W x H)

218 x 125 x 93 mm

430 x 420 x 17 mm

430 x 590 x 170 mm

Weight

1,2 kg

11 kg

15 kg

LIS-interface

--

yes

yes

PC-interface

--

yes

yes

 

The Ceveron® four and ten are available with an optional optical channel for chromogenic assays

Suitable for whole blood and plasma samples

Ceveron® m1, m2 and m4
Specifications of the semi-automated Ceveron® m1, m2 and m4

Ceveron® m1, m2 and m4 are semi-automated coagulation analysers to detect coagulation (PT Owren, PT, aPTT, FIB, TT). The measuring principle is based on the change of the cloudiness during the coagulation reaction.

 

Specifications

Ceveron®  m1

Ceveron® m2

Ceveron® m4

Channels

1

2

4

Wave length

620 (red)

405 (UV)

405 (UV)

Pre calibrated assays

yes

yes

yes

Pre warm cuvettes

10

20

20

Pre warm reagent positions

24 mm (piece)

22 mm (piece)

11 mm (piece)

 

1

2

2

 

1

2

2

 

1

2

2

Reagent mixing position

-

1

1

Sample material

Whole blood

Plasma

Plasma

Plasma

Parameters

PT Owren

PT, aPTT, FIB, TT

PT Owren

PT, aPTT, FIB, TT

PT Owren

PT, aPTT, FIB, TT

RS232

2

2

2

USB

2

2

2

Temperature (Pre incubation positions)

37°C

37°C

37°C

Display

Touchscreen (4.3“/109 mm)

Touchscreen (4.3“/109 mm)

Touchscreen (4.3“/109 mm)

Dimensions (device)

230 x 148 x 94 mm (L x B x H)

230 x 148 x 94 mm (L x B x H)

230 x 148 x 94 mm (L x B x H)

Power supply

110 – 240 V (ac)/

5 V (dc), 3,3 A

110 – 240 V (ac)/

5 V (dc), 3,3 A

110 – 240 V (ac)/

5 V (dc), 3,3 A

Ceveron® 100-Series

Ceveron® 100-Series

Short Info

Ceveron® one, four, ten

Ceveron® one, four, ten

Short Info

Ceveron® M-Series

Ceveron® M-Serie

Short Info

We are here for you

Haemochrom Diagnostica GmbH
Renteilichtung 1
45134 Essen
Germany

Phone: +49 (0)201 8 43 77-0
Fax: +49 (0)201 53 64 56
E-Mail: info@haemochrom.de

Send us a message