CEVERON® 100 series

NEW !

First fully automated coagulation analyzer series for clotting, chromogenic, turbidimetric assays, thrombin generation and quenching technology (FXIII & ADAMTS13 activity)

An explosion of possibilities !

The evolution of fully automated testing continues

The first fully automated instrument series where you can combine classic haemostasis diagnostics with Thrombin Generation, Factor XIII activity* and ADAMTS13 activity*

Simultaneous measurement of five technologies.

Up to five technologies clotting, chromogenic, turbidimetric, thrombin generation and quenching can be run at the same time.

*Quenching Module

High precision and flexibility

Rerun and reflex testing in combination with very low cv in routine and speciality testing, guarantee secure results for perfect diagnostics.

Having a minimal patient and reagent dead volume, adult´s and children´s samples can be run without any differentiation.

Due to the workflow of Ceveron® 100 series an exact incubation time on each measurement is guaranteed.

Comparison of reaction curves (samples, QC and calibration curves)

Easy access to all raw datas, help comparing patient results, QC results and calibration curves.

Complete QC monitoring

• Westguard Rules
• Laboratory specific confidence range
• 3s range
• Lifetime of validation adjustable

Using values made available by Technoclone, via batch tables, local established results or pre-period results of new QC lots.

Fast, accurate and minimized maintenance time

With a throughput of 75 PT/hour, a TGA result below 20 minutes and an ADAMTS13 activity result within 25 minutes, Ceveron® 100 series instruments are the perfect solution for fast and precise diagnostic of patients.

Ceveron® 100 series is ready to use within 5 minutes after switching on the instrument.

No daily maintenance needed. Just 15 minutes once per week.

High traceability

Sample and reagent handling is fully traceable. With no difference in barcoded, or non barcorded sample and reagent handling.

All used reagent lots, for each measurement can be sent to LIS.

Actual temperatures during the pipetting, incubation and reaction of each sample are shown, and stored on Ceveron® 100 series systems.

System and result security

Three security levels ensure, that just qualified users can run samples, perform calibrations or change settings.

On each security level, additional administrator rights can be set.

Due to the unlimited sample result storage, no QC or patient result can be lost due to limited storage capacity.

All results are stored on the Ceveron®, until they are deleted manually.

Automatic or manual backup including raw data and system status. The integrated logbook tracks all actions, created by the instrument, a user or the service technician.

[icon: save backup] [icon: mark backup] [icon: view backup]

Host connection

All Ceveron® 100 series instruments are equipped with Windows 10 and use ASTM 1394 bidirectional host connection.

Obviously the Ceveron® instruments can also operate in offline mode, as easy as connected to a LIS.

New intuitive icon based software

No matter which Ceveron® 100 series instrument, they are using the same intuitive icon based, touch screen optimized software.

Operating the Ceveron® 100 series instruments is even more simplified.

With our colour coded Ceveron symbol, the actual system status can be spotted at the first glimpse.

With just one klick you can place samples, mark them as [icon: STAT] Then [icon: loading] the reagents or just [icon: check volume] their actual status. After [icon: reload all] your cuvettes, just [icon: start] your sample testing. Meanwhile you can check your [icon: QC] results or [icon: compare] your last calibration curves. After receiving the test results you can compare your, [icon: reaction curve] , [icon: LIS transmit] the results manually or automatically to your LIS, or [icon: CSV export] them. If you have new lots of QC material, you can use the [icon: barcode] or enter the target values manually. When performing a new calibration, after [icon: validate] you are [icon: ok] to run your samples. If you have written your own tests, you can easily them [icon: import] to a second or third [logo: ceveron 100 series] instrument.

All patient, control and calibration results will be stored on the Ceveron until you [icon: save backup] and [icon: clear] them.

All steps are as easy as above, for Quenching and [icon: TGA] parameters.

Occasionally you have to [icon: refill system liquid] your system solution. Once a week you have to perform some [icon: maintenance] which claims 15 minutes of your valuable time.

Although we really appereciate all our Ceveron users, you will have a [icon: service] visit just once per year.

Needless to say, we can also keep in [icon: contact] using [icon: remote key] connection, if you need further assistance, working with your new [logo: ceveron 100 series] instruments.

CEVERON® 100 series SPECIFICATIONS

* depending on instrument

Technoclone Herstellung von Diagnostika und Arzneimitteln GmbH Brunner Str. 67 | 1230 Vienna | Austria Phone: +43 1 86373-0 | Fax: +43 1 86373-44 products@technoclone.com | www.technoclone.com

Your partner in Coagulation !

AN EXPLOSION OF POSSIBILITIES

Your instrument of choice for classical haemostasis routine and speciality testing. No matter if your focus is on routine diagnostics or on research projects.

Whether running patient samples in a routine setting or in deeply specialized research projects the new Ceveron® c100 is the perfect addition to your lab. We at Technoclone managed to improve the ease of use of this a fast, robust and precise instrument with our new, touch screen optimised software.

In combination with our high quality and long on board stable Technoclone reagents, you can now achieve even more performance in a minimal timeframe.

With no more space needed than our first generation Ceveron® alpha, we have refined our Ceveron® 100 series platform into the perfect solution for your haemostasis speciality testing, without loosing focus on routine assays.

CEVERON® c100

Testing classical clotting, chromogenic and turbidimetric parameters without limitation.

The perfect solution for routine and research analytics

• Easy operating with the new, touch screen optimized software
• High capacity result storage including used reagent lots and raw data
• Easy export of result and raw data files
• Open system with simple test application programming

Unique robustness and precision

• Very low cv in combination with Technoclone reagents
• High quality LED optics detect even smallest reaction changes in the cuvette
• Temperature monitoring of each individual measurement

Secure and high traceable

• Different password protected security levels available
• All activities of the Ceveron® c100 are tracked and stored in the audit trail
• Remote service access opportunity